Industrial Magnets

Product Details:

A magnetic conveyor utilizes a permanent magnetic core to retain ferrous materials to a conveying belt. Ferrous material/parts are introduced at a specified load point; a magnetic field emanating from below the conveyor belt attracts and retains the ferrous material to the belt surface.

Product Details:

Circular lifting magnet can handle tones of scrap continuously throughout the day. It is used in metalworking plants to hoist and transport steel parts, forgings, casting, plates, booms, channels, angles, rods and bars

Product Details:

We hold the expertise in manufacturing, supplying and exporting Scrap Magnet, Scrap Lifting Magnet , Scrap Lifter around the globe. Our products are manufactured using superior grade materials purchased from trust-worthy vendors. The entire products of us are featured with a strong load lifting facility, speedy load handling, cast steel body and light weight make. This is widely used in lifting higher loads and shifting them from one place to the other. Circular Lifting Magnet Capacity- 30 Ton

Product Details:

Magwell Rare Earth Plate Magnets are powerful permanent rare earth magnet material provides the means for a more effective separation performance? offering a broader range of applications? that include product flows with deeper burden depths. To remove both large and small pieces of tramp iron from product processing flows.

Our complete line of Rare Earth Plate Magnets includes customer size magnet are in three-stepped face designs. They can be configured with either a maximum holding value, or reach out, or a combination of both maximum holding and reach out values.

Our MAGWELL Rare Earth Plate Magnets plates, Plate magnetic separators,strong magnetic plate,Plate Magnets for Magnetic Separation, Plate Type Magnetic Separators, Rare Earth Plate Magnets, etc, provide increased magnetic strength for effective tramp metal separation on product flows and with the Neodymium-Iron-Boron magnetic material, product “wash-off” is minimal in below-the-flow installations.

 

Features:

• Mild steel or stainless steel construction.
• Transitions for round, square, or rectangular spouting.
• Available with ferric or Rare Earth magnets.
• Hinged plate magnets swing open for quick manual cleaning.
• Self-cleaning models reduce cleaning time and labor.
• Custom mounting flanges are available
• Abrasive resistant product contact surfaces

Application:

• Automatic and continuous removal of tramp iron process industries
• Chemical industries
• Ceramics industries
• Food industries
• Minerals
• Plastic industries
• Rubber industries
• Recycling industries

Product Details:

This black magnetic collector with an adhesive force of approx. 2,2 kg is perfect for picking up small metal objects and makes tidying up or separating ferromagnetic parts such as screws, nails, iron filings or needles easy

Product Details:

Magnetic Rod is a long Alnico Round Bar Magnet simple low cost form of magnetic separation. Used in a variety of industries from food or plastics processing to chemical and powder processing, According to the environment of your product, these magnetic filter bars can be made with Alnico or Rare Earth magnet material. They can be easily installed into machinery or assembled according to the wishes of the customers.

Features:

• Easy to assemble in machineries
• Available in custom specifications
• Made using high grade raw material

Product Details:

Magwell suspended Permanent magnets are designed to remove both large and small types of tramp metal from product streams conveyed by belts. Usually, the removal of the tramp metal can be obtained for a lower cost than an electromagnet.

Features:

• Most effective for removal of tramp iron from
• Materials carried over conveyors.
• Robust industrial design
• Permanent Magnet- No power required
• Easy installation and maintained
• Manufactured to Customer specification
• Four rigid lift lugs for easy suspension, two turn buckle out of 4 lifting lugs.
• Turn buckle easy to tilt magnet .
• No Electrical Maintenance On Permanent Magnet
• Dust and rain protection
• Installation across the conveyor belt or over the discharge head pulley

Typical application:

• Recycling industry
• Coal industry
• Abrasive Industry
• Rubber Industry
• Paper & Pulp Industry
• Quarry industry
• Ceramic industry
• Petroleum Industry
• Animal Feed Industry
• Mobile Screens & Shredders

Product Details:

Hopper Magnet offered comes in quality constructed finish and feature SS304 or SS316 tube with neodymium, ferrite magnet support. Further, we can offer the tubes in polished and full welded conditions so as to meet their use in food grade applications. Some of its features include available i standard diameter and OEM lengths; maximum work temperature of 80 ℃, ; surface gauss of 3000 to 12000Gs; can be easily installed inside laid-inside hoppers, housings to trap and hold ferrous fragments and small metal objects.

Product Details:

Hand Magnet are used to remove unwanted ferrous particles where other equipments cannot be used/accessed.

Features:

• Easy removal of iron particles from the handle by a quick snap facility
• Can be made to customer requirements
• Made out of powerful Permanent Magnet

Application:

• Foundries
• Work shop

Product Details:

Magnetic Trap offered comprise high performance flip-flop vibratory screens that combine two motions for creating dual vibration movement. Providing for highly effective work performance, the equipment is highly effective and is proven to be effective in screening all type of waste material. Some of its features include low maintenance and operating costs; compact and modular construction finish; single or multi deck type options; suitable for use in areas like sand & crushed stone, limestone & dolomite, municipal solid waste, bio-solids and others.

Product Details:

Magwell Foundry Magnets are designed to remove both large and small types of tramp metal from product streams conveyed by belts. Usually, the removal of the tramp metal can be obtained for a lower cost than an electromagnet.

 

Feature:

• Permanent Magnet- No power required
• Easy installation and maintained
• Manufactured to Customer specification
• Four rigid lift lugs for easy suspension, two turn buckle out of 4 lifting lugs.
• Turn buckle easy to tilt magnet .
• No Electrical Maintenance On Permanent Magnet
• Dust and rain protection
• Installation across the conveyor belt or over the discharge head pulley

Typical application:

• Recycling industry
• Coal industry
• Abrasive Industry
• Rubber Industry
• Paper & Pulp Industry
• Quarry industry
• Ceramic industry
• Petroleum Industry
• Animal Feed Industry
• Mobile Screens & Shredders