Magnetic Drum Separators

Product Details:

Magwell Magnetic Scrap Drums extremely well at ferrous removal in all applications. They have no dead spots and work with larger operating gaps. They yield a clean ferrous product and clean bulk materials. They protect processing equipment from damage by tramp iron.

We offers both electromagnetic (E) and permanent magnet (P) cores. They can be fed from the top or from below. Our company has highly qualified engineering design and development. Our Magnets are increased efficiency, durability, and long operating life.

Bulk raw material is distributed evenly with a vibrating feeder system on to a rotating magnetic drum. Any magnetic pieces attracted to the drum shell and is carried to the point where the magnetic core ends. The non-magnetic particles have fallen off before this point. With material and drum going in the same direction, the flow is easy to handle and ferrous losses are small. Even when the material is large, small or mixed, the size of the particles usually determines the diameter of the drum.

Our Patented Coil Design develops deep magnetic field with minimum DC power cost. Our electro-magnet drum opens the way to new efficiency in handling large volumes of large size material encountered in today’s scrap processing and mineral concentration applications. Our patented coil construction produces a concentrated deep magnetic field to maximize ferrous recovery. The drum consists of an electro-magnet assembly mounted inside an outer rotating drum assembly. The magnet assembly position, although stationary during operation, may be adjusted within certain limits to meet varying feed arrangements.

Features:

• We can supply customer requirement size design.
• Available in permanent or electro magnet models.
• Thick manganese steel shell with 50-75 mm stainless steel vertical cleats.
• Available in Stainless steel & Aluminum end flanges.
• Heavy duty sealed bearings.
• Heavy duty drive option.

Application:

• All Type Recycling Plant
• Bottom Ash
• Glass Cullet
• Wood Waste
• Shredded Scrap
• Municipal Solid Waste
• Foundry Sand
• Pre-separation of ferrous before Eddy-Current separators.

Product Details:

Magnetic Drum Separators are primarily designed and manufactured as low field intensity separators. They have an open magnetic system with the magnetic poles located in one plain. Magnetic Drum Separators are employed for separating iron particles from bulk material whenever foreign iron disturbs the subsequent process sequences. It is also used for removing or enriching strongly magnetic content of dry minerals.

Features:

• Rare earth magnet material for compact designs on request
• Heavy duty welded construction
• Tapped holes or handle and mounting base for mounting
• Stainless steel enclosed magnetic face
• Ceramic permanent magnet material, will not demagnetize
• Custom sizes and configurations
• Available in various strengths on request

Product Details:

We are a trustyworthy organization offering a wide a gamut of Magnetic Drum Separator.

Permanent Magnetic Separator in Stock and Ready to Ship. Single Drum Type Permanent Magnetic Separators. Superior Quality. On Time Delivery. Customized Products. Economical Price. Types: Magnetic Separator, Vibrating Screen

Product Details:

Electro Flux Equipments Pvt Ltd is India’s leading Industrial Lifting Magnet manufacturers. electro lifting magnets, excavator magnets, magnetic separators and vibrating equipment's.

Product Details:

Electro Flux Equipments Pvt Ltd is India’s leading Industrial Lifting Magnet manufacturers. electro lifting magnets, excavator magnets, magnetic separators and vibrating equipment's.

Product Details:

Drum magnetic separator can be extracted to higher purity ferromagnetic substance. Suitable for steel scrap, separation for large amount of iron and iron sharp materials. X-Ray sorter.

Product Details:

Magwell Wet Permanent Magnetic Separator is designed to handle the demands of increased production rates without adding additional drums to your circuit. The drum utilizes a wider arc magnet to increase retention time for maximum magnetic recovery. The interpole magnet arrangement allows for numerous polarity changes to improve the cleaning of recovered magnetic.

 

Operating Principle:

The liquid flows through a semi-circular separating chamber beneath a stainless steel drum to which the magnetisable particles are attracted. The strong, high-gradient magnetic field is created by a cylinder consisting of permanent magnetic discs positioned within the drum. These special permanent magnets generate particularly high field gradients which are necessary for successful separation, as is the need with all Magnetic-Separators.

 

For recovering Magnetic/Ferro-silicon in dense media plants and iron ores, wet drum separators are mainly used. They remove contamination from the product stream, increasing product purity and plant productivity. In the applications where the product purity is most essential, the wet drum separators can use powerful Rare Earth Magnets, which can remove very fine and weak contaminants even from dense materials.

 

A stationary, permanent magnet assembly is located inside of a rotating drum.This drum is housed in a complimentary tank with slurry flow paths that exposethe minerals to the magnetic field . Magnetic materials are pulled against the drum and move with it until they are outside of the magnetic field. The magnetic materials then fall away into the magnetic collector. Non-magnetic materials pass through the tank to the tailings discharge.

Technical Specifications:

Wet drum available in three different tank configurations:

• Concurrent Counter
• Current Counter
• Rotation

Stages offered:

• Single and multi-drum configurations are available for counter current con-current and counter rotation tank styles

Product Details:

The Electro Magnetic Scrap Drum Separators are designed high performance electromagnet system from an extensive range of designs to suit your application and provide the most effective and efficient method of metal recovery for below the head pulley or continuous processing or batch process. A electromagnetic field extracts tramp ferrous metal from the conveyor.

Features:

• Rare earth magnet material for compact designs on request
• Heavy duty welded construction
• Stainless steel enclosed magnetic face
• Ceramic permanent magnet material, will not demagnetize
• Custom sizes and configurations
• Available in various strengths on request

Product Details:

Magnetic Wet Drum Separator, Wet Drum Magnetic Separator, Food-Grade Magnetic Separators, Wet Drum Separator, Electro Magnetic Drum Separator, wet drum type separator .Wet magnetic separation Proces offeres highly efficient dry magnetic separator that are suitable to be used for strong magnetic minerals with coarse particles. Further, the system can effectively handle large feeding particle size as well as o not require any classification before feeding. Some of its features include high strength and high reliable performance; superior mechanical structure that assure of normal work of magnetic drum in harsh environment; used for lean iron roughing after roughing crushing to improve grade and reduce load of next procedure and for other industries requiring removal of iron.

Product Details: